|
For over 25 years, Tectron has been manufacturing mechanical tubing to serve a wide variety of customers and applications. And since its acquisition by Allied Tube in 1995, Tectron has continued to strengthen its dedication to producing quality products. Mills are continuously improved with the latest technology and various testing is done on a continual basis.
| Wide Material Availability |
| Cold Rolled Commercial Quality |
High Strength Low Alloy Steel |
| Cold Rolled Dust |
Hot Rolled Pickled & Oiled |
| Pregalvanized G-60, G-90 |
Aluminized TI-25, TI-40 |
Drawing Steel
|
|
| Wide Fabrication Availability |
| Saw cutting |
Haven cutting |
| Swaging |
Powder Coating |
Chamfering
|
|
| Wide Range of Shapes & Sizes |
| Round Tube Size Range: |
0.500" to 2.500" |
| Square Tube Size Range: |
0.500" to 2.000" |
| Rectangle Tube Size Range: |
1.000"x1.500" to 2.500"x1.500" |
Other Advantages
- All steel tube products are manufactured per ASTM A-513, Types 1 and 2.
- The tube mill's provide an in-line end cut on square tubing that has minimal or no deformation at the end and is comparable to having the tube cut off-line.
- The tube mill provides a standard "punch cut" on round tubing that leaves a dimple on the end of the tube. De-dimpling is available for all sizes of tubing.
- Tectron can roll back the weld seam to a maximum height of 0.005" or 0.010". Tectron can cut away instead of rolling back the flash. This is the preferred method if the fabrication on the part is severe.
Mechanical tubing representatives and authorized distributors..
For our full range of capabilities, download our Tectron weight per foot chart.
 Download Weigh-Per-Foot Chart
Request for Quote
Learn more in our Library of Literature & Technical Specifications.
|
Products
Industries Served
